-
Peterson
763A --- Revolving Amber Safety Light with Auxiliary Plug
Magnetic Revolving Amber Safety LightAmber Revolving Safety LightMagnetic BaseMade in the USA12' Cord with Cigarette Plug IncludedReflector Rotates Around BulbLight Diameter: 5-1/2"Light Height: 5"Replacement Bulb, Part No. 1195$151.95 -
Buyers
7683 --- Trailer Hitch Receiver Lock for 2" Receiver
Protect your investment against drawbar and ball mount theft with this receiver Lock. It features a covered key slot preventing corrosion in the Locking mechanism. Tough, Rugged Construction Chrome Plated Finish 5/8" Diameter Pin Fits 2" Receivers$16.95 -
Trimax
7690 --- Deadbolt Coupler Lock with 1/2" Span
Zinc FinishNon-Slip Grip for Ease of UseShank Diameter: 7mm or .276 InchesCovered Key Slot to Prevent CorrosionZinc FinishNon-Slip Grip for Ease of UseShank Diameter: 7mm or .276 InchesCovered Key Slot to Prevent Corrosion$17.95 -
Trimax
7692 --- Deadbolt Coupler Lock with 2-1/2" Span
Coupler Lock Non-Slip Grip for Ease of Use Rugged Lock Can't "POP" open or be false locked O-ring seal & water tight cap helps seal out dirt and corrosion Attractive sleek design Rugged tubular key won't bend or break Span: 2" - 2-1/2" Zinc...$18.95 -
Wesbar
76C --- Double Interior Light
12 Volt interior light with diffused lens optics. Two wire construction, supply and ground. Features a polypropylene base. Lights are independently controlled with two switches.Interior LightSwitches allow One or Both Lights to OperateDepth:...$15.95 -
Pollak
77 --- 7-Way Round with Flat Pin Socket and Plug
Vehicle End = Socket Durable Black Plastic Finish Trailer End = Plug Mounting Bracket, Part No. 77MB - Sold Separately$12.95 -
Buyers
7701 --- Ball Mount, Combination 1 7/8" and 2" welded Hitch Balls, 6,000 lb Capacity
Combination reversible Ball Mount with with larger hitch ball mounted in rise position1-7/8" Hitch Ball provides 2" Drop from the top of the shank to the top of the ball platform2" Hitch Ball provides 3/4" Rise from the top of the shank to the top of the...$50.95 -
Buyers
7703 --- Ball Mount, Combination 2" and 2-5/16" welded Hitch Balls, 6,000 lb Capacity
Combination reversible Ball Mount with with larger hitch ball mounted in rise position2" Hitch Ball provides 2" Drop from the top of the shank to the top of the ball platform2-5/16" Hitch Ball provides 3/4" Rise from the top of the shank to the top of...$54.95 -
Dexter Marine
7745 --- Model 10 & 20 Connector Gasket
Model 10 & Model 20 Brake Actuator Connect Gasket Inner Diameter: 1/2"Outer Diameter: 13/16"Use with 12099 fittingFits older Dico/Titan master cylinders with the rear 1/2" fitting Finish: Brass Legacy Brand: Dico/Titan$4.45 -
Dexter Marine
7768 --- Model 10 & 20 Breakaway Chain
Model 10 & Model 20 Brake Actuator Breakaway Chain Total Length of chain: 47"Link Length: 1-5/8"Link Width: 3/4"Link Diameter: 3/16"Finish: Zinc Plated Legacy Brand: Dico/Titan$23.95 -
Dexter Marine
7784 --- Model 20 Damper Shock
Model 20 Brake Actuator Damper Shock Length Collapsed: 8" Center of pinhole to center of pinhole Length Extended: 12" Center of pinhole to center of pinhole Diameter of body: 1-3/4" Diameter of smaller pinhole: 1/2" Diameter of larger pinhole: 7/8"...$60.95 -
Buyers
77MB --- Mounting Bracket for 7-Way Round Connectors
16 Gauge Steel, Zinc Plated Mounting Bracket Please call for more details$2.45 -
$5.45
-
Hopkins
77P/602S4F --- 7-Way Flat Pin to 4-Prong Flat and 6-Way Round Adapter
Hopkins Plug-In Simple! Adapters prevent the need to rewire a vehicle or trailer when the connector styles do not match. Simply plug-in and start towing. Adapts 7 Way RV Socket (Truck Side) to Either 4 Flat or 6 Round (Trailer Side) Center Pin can be...$19.95 -
Buyers
77P5F --- 7-Way Flat Pin to 5-Prong Flat Adapter
Does your vehicle have a 7-Way Flat Pin Socket and your trailer have a 5-Prong Flat Connector? This adapter is your answer. It converts the vehicle's 7-Way Flat Pin Socket to a 5-Prong Flat Female Connector. Simply plug the adapter in to the 7-Way Socket...$9.45 -
Wesbar
77PW-10FTCOIL --- Molded 7 Way RV Plug with 10' of Coiled Electrical Wire
Replacement coiled cable for the front of trailers.Durable, Black Outer Jacket Resists Abrasion and has Excellent Coil MemoryExtended Cable Length: 10 feetOne 7-way RV round plug with flat spades$80.95 -
Wesbar
77PW-12FTCOIL --- Molded 7 Way RV Plug with 12' of Coiled Electrical Wire
Replacement coiled cable for the front of trailers. Durable, Black Outer Jacket Resists Abrasion and has Excellent Coil Memory Extended Cable Length: 12 feet One 7-way RV round plug with flat spades$91.95 -
Wesbar
77PW-6FTCOIL --- Molded 7 Way RV Plug with 6' of Coiled Electrical Wire
Replacement coiled cable for the front of trailers.Durable, Black Outer Jacket Resists Abrasion and has Excellent Coil MemoryExtended Cable Length: 6 feetOne 7-way RV round plug with flat spades$59.95 -
Buyers
77PW-7FT --- 7-Way Molded Round Flat Pin Plug with Cable
This molded connector 7-Pin Trailer End Connector with 84" cable. Flat Pins Cable Length: 7' Trailer End = Plug RVI color-coded wiring terminals - Two 10 Gauge Wires, One 12 Gauge Wire and Four 14 Gauge Wires White - Ground - 10 Gauge Wire Black - 12v...$50.95 -
77PW/87S --- 7-Way Flat Pin to 7-Way Round Pin Adapter
Does your vehicle have a 7-Way Round Socket with flat blades and your trailer have a 7-Way Round Pin Plug? This adapter is your answer. It converts the vehicle’s 7-Way Round flat pin Socket to a 7-Way Round Pin Plug. Simply plug the adapter in to...$34.95 -
Buyers
77S --- 7-Way Round with Flat Pin Socket
Mounting Bracket, Part No. 118138 - Sold SeparatelyMounting Bracket, Part No. 77MB - Sold SeparatelyVehicle End = SocketDurable Black Plastic Finish$6.95 -
Buyers
77S11 --- Rubber Boot Socket Protector
Install on the back of the sockets to protect the wire connections. Rubber Boot Fits 177s and 87s$1.95 -
Wesbar
77SW-4FT --- 7-Way Super Sealed Round Flat Pin Socket with Cable
This molded connector can be used with thermo-plastic or metal 7-Way trailer end connectors.Vehicle End = SocketManufactured with UL Listed PVC for Flexibility and Features Molded Construction to Encapsulate Terminals and WireSocket Door Features EPDM...$53.95 -
Buyers
77SW-7FT --- 7-Way Super Sealed Round Flat Pin Socket with Cable
This molded connector can be used with thermo-plastic or metal 7-Way trailer end connectors. Manufactured with UL Listed PVC for Flexibility and Features Molded Construction to Encapsulate Terminals and Wire Socket Door Features EPDM Rubber Gasket and...$45.95 -
Buyers
780 --- Back Up Alarm
This Backup Alarm is ideal for all types of trucks and rubber-tire equipment. Meets SAE J1446 Requirements All Internal Components are Encapsulated in Epoxy for Protection from Vibration and Moisture Grounding Strap Allows Unit to be Grounded through...$25.95 -
Demco
7811 --- Shoe & Lining Kit for 10 Hydraulic Uni-Servo Brakes
Replacement shoe & lining kit For 10" uni-servo hydraulic brakes Fits Demco and Dico brakes One kit includes two front shoes and two rear shoes, enough for two brakes Style: Riveted Will not fit free backing brakes Does not include the hold down...$85.95 -
Demco
7812 --- Shoe & Lining Kit for 10" Hydraulic Free Backing Brakes
Replacement shoe & lining kit For 10" hydraulic free backing brakes Fits Demco and Dico brakes One kit includes two front and two rear shoes, enough for two brakes Style: Riveted Will not fit uni-servo brakes Does not include the hold down parts...$118.95 -
Demco
7813 --- Shoe & Lining Kit for 12" x 2" Hydraulic Uni-Servo Brakes
Replacement shoe & lining kit For 12" uni-servo hydraulic brakes Fits Demco and Dico brakes One kit includes two front and two rear shoes, enough for two brakes Style: Riveted Will not fit free backing brakes Does not include the hold down parts...$95.95 -
Demco
7814 --- Shoe & Lining Kit for 12" x 2" Hydraulic Free Backing Brakes
Replacement shoe & lining kit For 12" hydraulic free backing brakes Fits Demco and Dico brakes One kit includes two front shoes and two rear shoes, enough for two brakes Style: Riveted Will not fit uni-servo brakes Does not include the hold down...$130.95 -
Wesbar
787268 --- 4-Prong Flat Connector with 8' Jacked Cable - Trailer End
Black Molded plastic plug with jacketed 16 ga. wire. Trailer End = Male Half Length: 8' Style: Jacketed Cable Sealed Plug Color coded wires 4" of stripped wires$21.95 -
Wesbar
78C --- Utility Light with White Base
This compact design is surface mounted with a clear, snap-in lens.Rectangular Utility LightBase Color: WhiteLens Color: ClearTwo-Wire Construction, Supply & GroundClear, Snap-in LensRemote Switch RequiredSurface Mounts 4 Holes on 4-1/16" Center...$9.95 -
Fastway Trailer Products
7WAYCOVER --- Cover for 7 Way Round Connectors
Protects your 7-way Round Plugs from the elements. Fits the following plugs: 77P, 57P, 87P and 177P$7.45 -
Dexter
8-214-05 --- 10k Heavy Duty Oil Hub only with Races & 5/8" Studs
Oil Hub with 5/8" studs 10,000 lb Capacity Heavy Duty Oil Hub Only - Dexter Bolt Pattern: 8 on 6-1/2" Includes Races & 5/8" Studs Use with Dexter Drum: 9-027-1 Use with Dexter Two Piece Hub & Drum system Pilot Diameter: 4.75" *** Bearings,...$302.95 -
Dexter
8-285-08 --- Grease Hub & Drum only with Races & 5/8" Studs - 8,000 lb
Grease Hub & Drum with 5/8" studs 8,000 lb Capacity Grease Hub & Drum Only - Dexter Bolt Pattern: 8 on 6-1/2" Includes Races & 5/8" Studs Pilot Diameter: 4.75" *** Bearings, Seals, Dust Cap and Lug Nuts Sold Separately *** The...$465.95 -
Dexter
8-285-09 --- Oil Hub & Drum only with Races & 9/16" Studs - 8,000 lb
Oil Hub & Drum with 9/16" studs8,000 lb Capacity Oil Hub & Drum Only - DexterBolt Pattern: 8 on 6-1/2"Includes Races & 9/16" StudsPilot Diameter: 4.75"*** Bearings, Seals, Oil Cap and Nuts Sold Separately ***The following Bearings, Seals,...$448.95 -
Dexter
8-285-10 --- Oil Hub & Drum only with Races & 5/8" Studs - 8,000 lb
Oil Hub & Drum with 5/8" studs 8,000 lb Capacity Oil Hub & Drum Only - Dexter Bolt Pattern: 8 on 6-1/2" Includes Races & 5/8" Studs Pilot Diameter: 4.75" *** Bearings, Seals, Oil Cap and Nuts Sold Separately *** The following Bearings,...$462.95 -
Dexter
8-285-11 --- Grease Hub & Drum only with Races & 9/16" Studs - 8,000 lb
Grease Hub & Drum with 9/16" studs8,000 lb Capacity Grease Hub & Drum Only - DexterBolt Pattern: 8 on 6-1/2"Includes Races & 9/16" StudsPilot Diameter: 4.75"*** Bearings, Seals, Dust Cap and Lug Nuts Sold Separately ***The following Bearings,...$450.95 -
Dexter
8-287-07 --- Grease Hub only with Races & 5/8" Studs - 8,000 lb
Grease Hub with 5/8" studs8,000 lb Capacity Grease Hub Only - DexterBolt Pattern: 8 on 6-1/2"Includes Races & 5/8" StudsPilot Diameter: 4.75"*** Bearings, Seals, Dust Cap and Nuts Sold Separately ***The following Bearings, Seals, Dust Caps and Lug...$203.95 -
Dexter
8-287-11 --- Grease Hub only with Races & 9/16" Studs - 8,000 lb
Grease Hub with 9/16" studs8,000 lb Capacity Grease Hub Only - DexterBolt Pattern: 8 on 6-1/2"Includes Races & 9/16" StudsPilot Diameter: 4.75"*** Bearings, Seals, Dust Cap and Nuts Sold Separately ***The following Bearings, Seals, Dust Caps and Lug...$212.95 -
Dexter
8-287-14 --- Oil Hub only with Races & 9/16" Studs - 8,000 lb
Oil Hub with 9/16" studs8,000 lb Capacity Oil Hub Only - DexterBolt Pattern: 8 on 6-1/2"Includes Races & 9/16" StudsPilot Diameter: 4.75"*** Bearings, Seals, Oil Cap and Nuts Sold Separately ***The following Bearings, Seals, Dust Caps and Lug Nuts...$213.95 -
Dexter
8-287-17 --- Oil Hub only with Races & 5/8" Studs - 8,000 lb
Oil Hub with 5/8" studs8,000 lb Capacity Oil Hub Only - DexterBolt Pattern: 8 on 6-1/2"Includes Races & 5/8" StudsPilot Diameter: 4.75"*** Bearings, Seals, Oil Cap and Nuts Sold Separately ***The following Bearings, Seals, Dust Caps and Lug Nuts will...$226.95 -
Dexter
8-288-03 --- 9K & 10k General Duty Oil Hub only with Races & 5/8" Studs
Oil Hub with 5/8" studs - (Before July 2009)General Duty Oil Hub Only - Dexter 9,000 lb & 10,000 lb CapacityBolt Pattern: 8 on 6-1/2"Use with Dexter Drum 9-044-1Includes Races & 5/8" StudsPilot Diameter: 4.75"Note: Dexter's two piece hub drum 288...$316.95 -
Dexter
8-393-3 --- Oil Hub & Drum only with Races & 9/16" Studs - 7,200 lb
Oil Hub & Drum with 9/16" studs Oil Cap, O-Ring & Plug: 2135, 1045 & 4632 Oil Seal: 1063 Oil Spindle Nut, Washer & Cotter Pin: AN-1, AW-1 & CP18 Outer Bearing: 2475 Inner Bearing: 25580 Includes Races & 9/16" Studs Bearings,...$440.95 -
Dexter
8-393-4 --- Grease Hub & Drum only with Races & 9/16" Studs - 7,200 lb
Grease Hub & Drum with 9/16" studs Inner Bearing: 25580 Outer Bearing: 02475 Grease & EZ Lube Seal: 1036 Grease Nut, Washer & Cotter Pin: AN-1, AW-1 & CP18 EZ Lube Jam Nut, Nut Retainer & Washer (after 2002): 6-191, 6-190 &...$440.95 -
Dexter
8-393-5 --- Oil Hub & Drum only with Races & 5/8" Studs - 7,200 lb
Oil Hub & Drum with 5/8" studs Pilot Diameter: 4.75" Coned 5/8" Wheel Nut: WN5818R Oil Spindle Nut, Washer & Cotter Pin: AN-1, AW-1 & CP18 Oil Cap, O-Ring & Plug: 2135, 1045 & 4632 Oil Seal: 1063 Bearings, Seals, Oil Cap and Nuts...$435.95 -
Dexter
8-393-6 --- Grease Hub & Drum only with Races & 5/8" Studs - 7,200 lb
Grease Hub & Drum with 5/8" studs EZ Lube Cap & Plug: 21-43-1 & 85-1 Coned 5/8" Wheel Nut: WN5818R Grease Cap: DC605 EZ Lube Castle Nut, Nut Retainer & Washer (prior 2002): AN-1, 5-101 & AW-1 EZ Lube Jam Nut, Nut Retainer &...$436.95 -
Dexter
8-407-91 --- 6 on 5-1/2" Hub and Drum Assembly for Dexter D44 Axles - 4,400 lb
This hub and drum assembly includes races and studs. For use with 10" x 2-1/4" Dexter D44 Electric brakes. 4,400 lb Hub and Drum Assembly Hub/Drum will have 8-407 stamped on it Bolt Pattern: 6 on 5-1/2" For Use with 10" x 2-1/4" Dexter D44 Electric...$256.95 -
Dexter
8-430-03 --- 9K & 10k General Duty Oil Hub only with Races & 5/8" Studs - after July 2009
Oil Hub with 5/8" studs - (After July 2009)General Duty Oil Hub Only - Dexter 9,000 lb & 10,000 lb Capacity (after July 2009)Bolt Pattern: 8 on 6-1/2"Pilot Diameter: 4.75"Includes Races & 5/8" StudsUse with Dexter Drum 9-123-03Note: Dexter's two...$311.95 -
Dexter
8-430-05 --- 9k & 10k General Duty Oil Hub & Drum kit only with Races & 5/8" Studs
Oil Hub & Drum with 5/8" studs General Duty Oil Hub & Drum Kit - Dexter 9,000 lb & 10,000 lb Capacity Bolt Pattern: 8 on 6-1/2" Includes Races & 5/8" Studs Pilot Diameter: 4.75" Use with 12-1/4" x 3-3/8" brake sizes 8-430-05 is a...$583.95 -
Dexter Marine
8-435-05 --- UFP by Dexter Hub/Rotor for 3.5k - Zinc - DB35
UFP by Dexter, Hub/Rotor for 3.7k for use with DB35 Disc Brakes Fits 3.7k UFP spindles Includes races and studs Hub includes a groove for an O-ring for Oil Cap installation Bolt Pattern: 5 on 4.5 Finish: Zinc Studs: 1/2 - 20 Requires Inner...$151.95 -
Dexter Marine
8-436-05 --- UFP by Dexter Idler Hub for 3.7k - Zinc
UFP by Dexter, Idler Hub for 3.7K. Fits 3.7k UFP spindles Includes races and studs Hub includes a groove for an O-ring for Oil Cap installation Bolt Pattern: 5 on 4.5 Finish: Zinc Studs: 1/2 - 20 Requires Inner Bearing: L68149 Requires Outer...$77.95 -
Dexter Marine
8-447-05 --- UFP by Dexter Idler Hub for 4.2k - Zinc
UFP by Dexter, Idler Hub for 4.2K. Fits 4.2k UFP spindles Includes races and studs Hub includes a groove for an O-ring for Oil Cap installation Bolt Pattern: 5 on 4.5 Finish: Zinc Studs: 1/2 - 20 Requires Inner Bearing: L68149 Requires Outer...$112.95 -
$50.95
-
Convert-A-Ball
800B --- Convert-A-Ball Kit, 3/4" Nickel Regular Shank plus 1-7/8" and 2" Nickel Hitch Balls
Choose only the best. The Convert-A-Ball Hitch System beats the national standard SAE-J684-E for hitch balls. 3/4" Nickel Shank rated at 3,500 lb Capacity 3/4" Dia. x 2" Long Nickel Shank Convert-A-Ball Kit 1-7/8" Nickel Hitch Ball 2" Nickel Hitch Ball$49.95 -
Proâ„¢ Series
80552 --- Duraplas Wheel Caster, 6" x 2", Fits 2" O.D. Inner Tube
This Jack Caster is ideal to use with your A-Frame or Tube Jack for added trailer mobility. Wheel Width: 2" Wheel Diameter: 6" Jack Inner Tube Fits Inside Caster Attachment Tube Raises Jack 7" Fits jacks with 2" O.D. Inner Tube Wheel Width: 2" Wheel...$26.95 -
BULLDOG
80580 --- Mounting Bracket
Jack Mounting Bracket Pinhole Diameter: 3/8" Weld Bracket on to Trailer Tongue Replacement 3/8" Plunger Pin is not available Use with Snap Ring, Part No. 18405 Snap Ring not Included$10.45 -
Draw-Tite®
80796 --- Ball Mount, Combination 2" and 2-5/16" Welded Hitch Balls, 16,000 lb Maximum Capacity
Ball Mount Combination with 2" Hitch Ball and 2-5/16" Hitch Ball welded onto a solid shank. Solid Shank Construction Ball Mount length is 8" from center of ball to center of pinhole 2-5/16" Hitch Ball Rating: 16,000 lb Gross Towing Weight, 1600 lb...$88.95 -
Demco
80881 --- Hydraulic Brake Line Kit for Single Axle Trailer
This kit includes all the tubing, hoses, and connectors required to connect the master cylinder to the brakes on most single axle trailers.This Kit contains the following:One - 193" Steel Brake LineOne - 17" Steel Brake LineOne - 72" Steel Brake LineOne...$65.95 -
Demco
80883 --- Hydraulic Brake Line Kit for Torsion Single Axle Trailer
Single Axle Tube and Fitting Kit for TORSION Axles. Includes all the tubing, hoses and fittings required to connect the master cylinder to the brakes on TORSION Axles.This Kit contains the following:One - 193" Steel Brake LineOne - 17" Steel Brake...$92.95 -
Demco
80891 --- Hydraulic Brake Line Kit for Tandem Axle Trailer
This kit includes all the tubing, hoses, and connectors required to connect the master cylinder to the brakes for most Tandem Trailers.This Kit contains the following:One - 193" Steel Brake LineTwo - 17" Steel Brake LineTwo - 72" Steel Brake LineOne -...$128.95 -
Demco
80893 --- Hydraulic Brake Line Kit for Torsion Tandem Axle Trailer
Tandem Axle Tube and Fitting Kit. Includes all the tubing, hoses and fittings required to connect the master cylinder to the brakes on TORSION Axles.This Kit contains the following:One - 193" Steel Brake LineTwo - 17" Steel Brake LineTwo - 66" Steel...$167.95 -
Demco
8101022 --- Demco Hydraulic Brake Actuator with Channel Centered - 12,500 lb Capacity - Model DA10
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$445.95 -
Demco
8101031 --- Demco Hydraulic Brake Actuator with Channel Down - 12,500 lb Capacity - Model DA10
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$479.95 -
Demco
8101532 --- Demco Hydraulic Brake Actuator with 12" Down Channel - 12,500 lb Capacity - Model DA10
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$479.95 -
Demco
8102131 --- Demco Hydraulic Brake Actuator with Down Channel - 12,500 lb Capacity - Model DA10
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$510.95 -
Demco
8105033 --- Demco Hydraulic Brake Actuator with Channel Centered - 12,500 lb Capacity - Model DA10
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$426.95 -
RAM
81271 --- Replacement Round Weld On Mounting Tube - 5/8" Pin Hole
Weld-On Round Jack Tube. Outer Diameter of Tube: 2" Male Mount - Fits Inside Jack Mounting Tube Use with 5/8" Pin and Chain, Part No. 700026 Weld Mounting Tube on to Trailer Tongue pinhole Diameter: 5/8" Length of Tube: 2"$7.45 -
Dexter
81745 --- 5 on 9-7/8" Demountable Hub and Drum Only - 7,000 lb
Bearings, Races, Grease Seal, Dust Cap and Nuts Sold Separately7,000 lb Capacity Hub and Drum OnlyFor Use with 12" x 2" Electric or Hydraulic BrakeFor Use with # 42 or # A SpindleBolt Pattern: Demountable, (Mobile Home Style), 5 on 9-7/8"Use on 3" Axle -...$286.95 -
Peterson
820012 --- Polycarbonate Document Holder
Stores licenses, permits and inspection stickers, keep them free of moisture and dirt. Includes Mounting Screws High-Impact Plastic Tension Spring holds Documents in Place with Cover Removed Cam-on Translucent Cover has Gasket Seal Polycarbonate Smoked...$13.45 -
Demco
8202052 --- Demco Hydraulic Brake Actuator with Flat Plate - 20,000 lb Capacity - Model DA20
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$523.95 -
Demco
8202531 --- Demco Hydraulic Brake Actuator with 12" Channel Down - 20,000 lb Capacity - Model DA20
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$557.95 -
Demco
8202532 --- Demco Hydraulic Brake Actuator with 12" Down Channel - 20,000 lb Capacity - Model DA20
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$523.95 -
Demco
8203332 --- Demco Hydraulic Brake Actuator with Down 12" Channel - 20,000 lb Capacity - Model DA20
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$523.95 -
Proâ„¢ Series
82650 --- Steel Jack Foot, Fits 2" O.D. Inner Tube - Zinc
This Jack Foot is ideal to use with your A-Frame or Tube Jack for added trailer stability. Fits jacks with 2" O.D. Inner Tube Includes Safety Pin to Attach Foot to Jack Jack Inner Tube Fits Inside Foot Attachment Tube Maximum Capacity: 5,000 lb Finish:...$11.45 -
RAM
82660 --- Extended Steel Jack Foot 8", Fits Jacks with 2" O.D. Inner Tube
This Jack Foot with Extension is ideal to use with your A-Frame or Tube Jack for added height and trailer stability. Fits jacks with 2" O.D. Inner Tube Includes Pin and Clip to Attach Foot Extension to Jack Jack Inner Tube Fits Inside Foot Attachment...$15.95 -
Dexter Marine
8284 --- Model 20 Centering Rail
Model 20 Brake Actuator Centering Rail Finish: Zinc Plated Legacy Brand: Dico/Titan$14.95 -
Dexter Marine
8288 --- Model 10 & 20 Front Roller Bolt
Model 10 & Model 20 Brake Actuator Front Roller Bolt Bolt: 5/8" x 4-3/8" x 1/2" - 13 Quantity Required for Dico Model 10 Actuator: 1Quantity Required for Dico Model 20 Actuator: 2Finish: Zinc Plated Legacy Brand: Dico/Titan$19.95 -
Dexter Marine
8289 --- Model 20 Front Roller Cover
Model 20 Brake Actuator Roller Cover Finish: Zinc Plated Legacy Brand: Dico/Titan$18.95 -
Dexter Marine
8291 --- Model 6, 10 & 20 Rear Roller
Model 6, Model 10& Model 20 Brake Actuator Rear Roller Quantity Required for Model 6 & Model 10 Actuators: 2 Quantity Required for Model 20 Actuator: 6 Finish: Zinc Plated Legacy Brand: Dico/Titan$7.45 -
Dexter Marine
8294 --- Model 20 Rear Roller Bolt
Model 20 Brake Actuator Rear Roller Bolt Finish: Zinc PlatedBolt: 5/8" - 18 x 5"Quantity Required for Dico Model 20 Actuator: 2 Legacy Brand: Dico/Titan$19.95 -
Dexter Marine
8295 --- Model 20 Rear Roller Bolt
Model 20 Brake Actuator Roller Bolt Finish: Zinc Plated Legacy Brand: Dico/Titan$12.95 -
Dexter Marine
8297 --- Model 20 Spacer
Model 20 Brake Actuator Spacer Quantity Required per Actuator: 3 Finish: Zinc Plated Legacy Brand: Dico/Titan$13.45 -
Dexter Marine
8298 --- Model 20 Damper Bar
Model 20 Brake Actuator Damper Bar Quantity Required for Dico Model 20 Actuator: 2 Finish: Zinc Plated Legacy Brand: Dico/Titan$6.45 -
Dexter Marine
8301 --- Model 10 & 20 Push Rod Block
Model 10 & Model 20 Brake Actuator Push Rod Block Finish: Zinc Plated Legacy Brand: Dico/Titan$7.45 -
Draw-Tite®
8322 --- J-Pin Anti-Rattle Lock
More than just a hitch pin. J-Pin quickly and confidently secures ball mounts and other hitch-mounted accessories, eliminating the sway and rattle caused by part clearance issues. The J-Pin works by compressing the hitch-mounted accessory against the...$55.95 -
RAM
83670 --- Bottom Support Plate, Fits Jack with 2-1/4" O.D. Outer Tube
Weld Bottom Support Plate to Underside of A-Frame Hole Diameter: 2.29"$4.45 -
Dexter Marine
8388 --- Model 10 & 20 Cylinder Bracket Assembly - Right
Model 10 & Model 20 Brake Actuator Right Hand Master Cylinder Bracket Assembly Finish: Painted Legacy Brand: Dico/Titan$38.95 -
Dexter Marine
8389 --- Model 10 & 20 Cylinder Bracket Assembly - Left
Model 10 & Model 20 Brake Actuator Left Hand Master Cylinder Bracket Assembly Finish: Painted Legacy Brand: Dico/Titan$38.95 -
Peterson
844-252 --- Peterson Replacement Red Square Lens for LED844
Peterson Replacement Lens for Part No. LED844 and LED844L Combination LED Low Profile Tail LightsSquare Replacement lens For LED lightColor: RedLength: 5.31"Height: 4.61"Attachment: Snap-OnBrand: Peterson$5.95 -
Peterson
844-253 --- Peterson Replacement Red Rectangular Lens for LED844
Peterson Replacement Side Lens for Part No. LED844 and LED844L Lights.Replacement Side LensFits Peterson's LED844 and LED844L LightsColor: Red with ReflectorHeight: 4.61"Length: 1.8"Attachment: Snap-OnBrand: Peterson$3.95 -
Hydro-Act
850279 --- Hydro-Act Actuator Metal Vented Filler Cap
Diameter of threads: 1-5/8" TPI of threads: 18 Vent filler Cap NSN Number: 2590 01 388 2416 Tacom Part Number: 12331725-2 Hydro-Act Part Number: 850198 Hydro-Act Model Number: 850279$65.95 -
Demco
8509202 --- Demco Hydraulic Brake Actuator with 2" Bulldog Coupler - 7,000 lb Capacity - Model DA91
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$404.95 -
Demco
8509602 --- Demco Hydraulic Brake Actuator with 2" Bulldog Coupler - 7,000 lb Capacity - Model DA91
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$438.95 -
Demco
8509612 --- Demco Hydraulic Brake Actuator with 2" Bulldog Coupler - 7,000 lb Capacity - Model DA91
Demco hydraulic brake actuators are specifically designed to perform even in the harshest braking environments. The master cylinder cap has an automotive-style diaphragm for a completely enclosed brake system, preventing brake fluid contamination. The...$448.95 -
85210 --- 7-Way Round with Round Pins to 5-Way Flat Adapter
Designed to adapt 7-Way Round pin socket on Vehicle to 5-Way Flat on front of trailer. Please call for more details$19.95 -
Curt
85218 --- Cover for 4-Flat Connectors
Protects your 4-flat from the elements, covering the 4 prongs. Helps prevent problems caused by corrosion Universal design Fits either vehicle or trailer 4-Flat connector Universal appealing black color Installs in seconds Soft flexible rubber...$3.95
Main Menu
- Home
- Parts expand_more
- Trailers expand_more
-
Store Locations expand_more
-
All Store Locations
-
Kansas City Service Center
Croft - Kansas City, MO
4933 Truman Road
Kansas City, MO 64127Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm816-483-7274
-
Lee's Summit Service Center
Croft - Lee's Summit, MO
2401 S. State Route 291
Lee's Summit, MO 64082Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm816-525-9355
-
Olathe Service Center
Croft - Olathe, KS
970 N. Rogers Road
Olathe, KS 66062Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm913-780-1818
-
Smithville Service Center
Croft - Smithville, MO
632 South U.S. 169 Highway
Smithville, MO 64089Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm816-532-8900
-
All Store Locations
- Blog
- Events
-
Resources expand_more
Information
Sponsorships
-
All Resources
-
Information
Sponsorships
-
-
About Us
-
The Foundation of Croft Trailer Supply
Product Reliability. Customer Satisfaction. Speedy Delivery.
Croft has grown from generation to generation to include four service centers and a distribution center. We still manufacture Croft trailers with the same integrity and attention to craftsmanship as George did over seventy years ago. We also offer more than five thousand towing and trailer parts to meet every need our customers have.
-
-
Services
-
We offer a variety of services including new installations on tow vehicles, trailer service and repair, DOT trailer inspections, and custom modifications to trailers. Our service technicians are here to keep you rolling.
-
-
Sponsorships
-
Sponsorships
-
-
Careers
-
Work at Croft
We're always looking for incredible people to join the Croft family. To apply, fill out an application online by clicking the link below.
-
-
All Resources
- Contact Us