The B&W Slider is available as an accessory to the B&W Underbed Turnover Gooseneck Hitch continuing the B&W tradition of "A Hitch When You Need It, A Level Bed When You Don't." The B&W Underbed Turnover Gooseneck Hitch is first installed and then the Companion latches into the 2-1/2" square hole. Simply remove the Slider when you need a flatbed.
Made in the USA
CANNOT be used with any Pin Box that requires a Wedge system
- Slider with Head assembly
- Slider has 12" inches of movement
- Base comes fully assembled (arms must be installed to desired height)
- Threaded plate for easier installation of arms
- Automatically latches in both directions
- Fully articulating coupler head allows front to back and side to side pivoting
- 1" thick, wrap-around jaws fit kingpins perfectly, eliminating sloppy starts and stops
- Tight tolerances in sliding mechanism, moves smoothly without the rattle
- Vibration-Dampening Polyurethane Bushings Act as the Base for the Front-to-Back Pivot
- Hydraulic Shock Absorber Helps Stabilize Side-to-Side Motion and Holds Head Level for Easier hookup
- 3 vertical adjustments: 17", 18" and 19" from top of ribs to top of coupler
- Gross Trailer Weight Capacity: 20,000 lb GTW
- Vertical Tongue Weight Capacity: 5,000 lb VTW
- Note: CANNOT be used with B&W Turnover Gooseneck Hitch, Model No. BW1300 or BW1309
- Only to Be Used with B&W Turnover Gooseneck Hitches
- Works Well with Most Bed Liners
- Measurement from center of hitch post to front edge (cab-side) of hitch: 15"
- Footprint: 34.75" Wide x 45" Deep
- Finish: Gray, Powder Coat
- 5 year limited warranty
- MUST SHIP FREIGHT TRUCK
picture_as_pdf Download BW3405 Instructions
picture_as_pdf Download B&W Warranty
California Residents: Proposition 65
