$7.95
$19.95
$14.45
$2.95
$62.95
$5.95
$3.45
$1.45
$11.45
$7.45
$9.95
$17.95
$45.95
$2.95
$104.95
$114.95
$104.95
$116.95
$104.95
$124.95
$109.95
$175.95
$164.95
$165.95
$10.95
$9.45
$3.45
$3.95
$44.95
$2.95
$9.45
$8.45
$26.95
$37.95
$26.95
$61.95
$73.95
$0.48
$0.15
$1.95
$0.00
$0.20
$0.12
$53.95
$3.95
-
Demco
03866-95 --- Demco Emergency Lever Guide
Emergency Lever Guide Fits Demco Brake Actuators: DA91, DA10, DA20, and DA86 Will not fit Dexter A160/A200 actuators, not same sizeAdd to Cart$7.95 -
Demco
03876X --- Demco Master Cylinder Cap w/Diaphragm & O-Ring
Demco Replacement Master Cylinder Cap Fits the Demco models DA66, DA70, DA86, DA10, DA20, DA91BZ and DA91 Includes built in diaphragm Includes O-ringAdd to Cart$19.95 -
Demco
05408X --- Demco 3/32" Cable with Hook - 42-1/2"
Yoke on one end for hooking to the brake actuator emergency lever and a 3/8" safety clip hook on the other end. Over All Length: 42 1/2" 3/8" Hook with Safety Clip not a Replaceable Item Fits DA91, DA91BZ, DA10 and DA20 Brake Actuators Demco has...Add to Cart$14.45 -
Demco
05679X --- Master Cylinder Connector - 1/8" Hole
Inverted Flare Adapter - Screws into the back of a master cylinder to allow a 3/16" brake line to connect to the master cylinder Required on both Demco Master Cylinders: 5672 & 05680X 1/8" Pipe - 3/16" Inverted Flare Fitting with 1/8"...Add to Cart$2.95 -
Demco
05680X --- Demco Drum Brake Master Cylinder Kit w/Gasket
Replacement Master Cylinder for Demco Brake Actuators. For Use with Drum Brakes Only. Fits only Demco brake actuators For use with Drum Brakes Only Kit includes mounting hardware, gasket, cap, rubber boot and cover plate Diaphragm in master cylinder cap...Add to Cart$62.95 -
Demco
05687X --- Demco Master Cylinder Protective Boot
Protective boot for Demco Master Cylinders Fits Demco Master Cylinders: 5672 & 05680XAdd to Cart$5.95 -
Demco
05693-95 --- Demco Emergency Lever Spring
Demco Emergency Lever Spring Fits Demco DA66, DA70, DA86, DA91, DA10, and DA20 brake actuators Will not fit Dexter A160/A200 actuators, not same sizeAdd to Cart$3.45 -
Demco
05849X --- Demco O-Ring for Master Cylinder Cap
Fits Demco models DA10, DA20, DA91BZ and DA91 Use with Demco screw in master cylinder cap, part number: 03876X Size: OD 1-1/16 x ID 7/8"Add to Cart$1.45 -
Demco
05951X --- Demco Emergency Lever
Demco Breakaway Lever Fits DA66, DA86, DA91, DA10 and DA20 Brake Actuators Will not fit Dexter A160/A200 actuators, not same size Zinc plated Demco has designed its emergency lever and brake away systems to adhere to Federal Code [FMCSR Title 49,...Add to Cart$11.45 -
Demco
05973X --- Demco DA10 Front Shock Pin
DA10 Front Shock Pin Length: 3-3/8" Diameter: 7/8" Finish: Zinc PlatedAdd to Cart$7.45 -
Demco
05974X --- Demco DA10 Rear Shock Pin
Rear Shock Pin for DA10 Demco brake actuators. Pin Diameter: 5/8" Overall Length: 4-9/16" Diameter of Head: 13/16" Length under head to end: 4-3/8" Usable length: 4-1/8" Zinc PlatedAdd to Cart$9.95 -
Demco
05986X --- Demco DA10, DA91 & DA91BZ Connecting Pin
Connecting Pin for Demco DA91, DA91BZ and DA10 brake actuators Pin Diameter: 7/8" Overall Length: 4-3/4" Diameter of Head: 1-1/16" Length under head to end: 4-7/16" Usable length: 4-1/8" Zinc PlatedAdd to Cart$17.95 -
Demco
05989X --- Demco DA10 Push Rod
Demco DA10 Push Rod Overall Length: 8-3/4" Fork Width: 2-1/2" Square behind forks: 2-1/2" x 2-1/4" Length of Fork: 2" Width of one fork: 1/2" Finish: Zinc PlatedAdd to Cart$45.95 -
Dexter Marine
10555 --- Brake Actuator S-Hook
Brake Actuator S-Hook Actuator S-Hook fits current Dico models and old style Demco models Fits DexMarine DX8.0, DX12.5 and DX20EX Finish: Zinc Plated Legacy Brand: Dico/Titan; Model 6, Model 10 and Model 20Add to Cart$2.95 -
Demco
11052-97 --- Demco DA10 Flat Plate - Primed
Inner Slide for DA10 with Flat Plate. DA10 Inner Slide Finish: Prime Flat Plate 5 sets of holesAdd to Cart$104.95 -
Demco
11053-95 --- Demco DA10 Centered Clevis Channel - Zinc
Inner Slide for DA10 with centered channel Inner Slide for Model DA10 Demco Actuators Centered 4 Hole channel Finish: Zinc Plated Insert Size: 3"x5"Add to Cart$114.95 -
Demco
11053-97 --- Demco DA10 Centered Clevis Channel - Primed
DA10 Inner Slide Inner Slide for Model DA10 Demco Actuators Centered 4 Hole channel Finish: Primed Insert Size: 3"x5"Add to Cart$104.95 -
Demco
11058-95 --- Demco DA10 Channel Down - Zinc
Inner Slide for DA10 with Channel Down DA10 Inner Slide Finish: Zinc 4 Hole Down Channel Channel Position: downAdd to Cart$116.95 -
Demco
11058-97 --- Demco DA10 Channel Down - Primed
Inner Slide for DA10 with Channel Down DA10 Inner Slide Finish: Primes 4 Hole Down Channel Channel Position: downAdd to Cart$104.95 -
Demco
11060-95 --- Demco DA10 12" Channel Down - Zinc
DA10 Inner Slide 6 Hole Channel in Down Position Finish: Zinc Insert Size: 3"x5" Inner Slide for Model DA10 Demco ActuatorsAdd to Cart$124.95 -
Demco
11068-97 --- Demco DA10 Weld-On Outer Case
Demco outer case for DA10 - Weld-On DA10 Outer Case Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" Finish: PrimedAdd to Cart$109.95 -
Demco
11082X --- Demco DA10 Bolt-On Outer Case
Demco outer case for DA10 with three hole standard bolt pattern DA10 Outer Case Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" Finish: Zinc platedAdd to Cart$175.95 -
Demco
11084-95 --- Demco DA10 Bolt-On Outer Case - 5 Hole Mount
Demco outer case for DA10 with five hole standard bolt pattern DA10 Outer Case Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" Finish: Zinc PlatedAdd to Cart$164.95 -
Demco
11088-97 --- Demco DA10 Weld-On Outer Case 50 degree A-Frame Mount
Demco DA10 A-frame outer case: Weld-On Outer Case Length: 16-1/4" Outer Case Width: 4" Outer Case Height: 6-1/4" 50 Degree Angle for mounting on tongue Finish: PrimedAdd to Cart$165.95 -
Demco
11674 --- Demco DA10, DA66, DA86 and DA91 Solenoid Cover
Metal Solenoid Cover for Demco Brake Actuators DA10, DA66, DA86 and DA91 Cover bolts on back side of outer caseAdd to Cart$10.95 -
Demco
12267-95 --- Demco DA66B & DA70 Solenoid Cover
Metal Solenoid Cover for Demco Brake Actuators DA66 and DA70 Cover bolts on back side of outer caseAdd to Cart$9.45 -
Demco
12396 --- Demco Rue Ring Lock Cotter Pin - 5/8"
Rue Ring Cotter Pin Lock Fits 5/8" pin DA91, DA10 and DA20 actuators require one eachAdd to Cart$3.45 -
Demco
12397 --- Demco Rue Ring Lock Cotter Pin - 7/8"
Rue Ring Locking Cotter Pin Fits 7/8" diameter pin DA91 and DA91BZ actuators requires one DA10 and DA20 actuators require twoAdd to Cart$3.95 -
Demco
12426 --- Demco & DexMarine Damper Shock
This Damper Shock fits the following Brake Actuators: Demco DA10 - Two Required Demco DA20 - Two Required Demco DA91 - One Required Demco DA91BZ - One Required DexMarine DX8.0 (Dico/Titan Model 6) - One Required DexMarine DX12.5 (Dico/Titan Model 10) -...Add to Cart$44.95 -
Dexter Marine
12489 --- External Star Lockwasher - 5/16"
External Tooth Lock Washer Diameter: 5/16" Finish: Zinc plated External Tooth Washer For use on Demco DA66, DA70, DA86, DA91, DA91BZ, DA10, DA20 Brake Actuators. Quantity Required for Demco Models: 2Add to Cart$2.95 -
Demco
12557 --- Demco Master Cylinder Cover Plate
This cover plate is not used on Demco actuators that have the threads for the master cylinder cap tapped into the outer case. Bolt pattern on plate, center to center, 2" x 3" Fits both Master Cylinders: 05680X & 5672Add to Cart$9.45 -
Demco
17434 --- Demco Master Cylinder Gasket
Demco Master Cylinder Gasket Fits Demco Brake Actuators: DA66, DA70, DA86, DA91, DA10, and DA20 Works with both Disc and Drum master cylinders: 5672 & 05680XAdd to Cart$8.45 -
Demco
5398 --- Demco Master Cylinder Repair Kit - Drum Brakes
Master Cylinder Repair Kit This master cylinder repair kit is for Drum brakes only Gasket will not fit old style cast master cylinders Bore of push rod: 1" For Disc brakes use part number, 5482DAdd to Cart$26.95 -
Demco
5401 --- Demco Emergency Lever Kit
Emergency Lever Kit for Demco DA86, DA91, DA10, and DA20 brake actuators. Kits includes one each of the following parts:05408X - Emergency Cable05693-95 - Emergency Lever Spring05951X - Emergency Lever03866-95 - Emergency Lever GuideAdd to Cart$37.95 -
Demco
5482D --- Demco Master Cylinder Repair Kit - Disc brakes
Master Cylinder Repair Kit - Disc Brakes This master cylinder repair kit is for Disc brakes only Gasket will not fit old style cast master cylinders Bore of push rod: 1" For Drum brakes use part number, 5398Add to Cart$26.95 -
Demco
5672 --- Demco Disc Brake Master Cylinder Kit w/Gasket
Replacement Master Cylinder for Demco Brake Actuators. For Use with Disc Brakes Only. For use with Disc Brakes Only Kit includes mounting hardware, gasket, cap, rubber boot and cover plate Diaphragm in master cylinder cap provides completely enclosed...Add to Cart$61.95 -
Demco
5943 --- Demco DA10 Wear Pad Spacers Kit
Kit Includes the following: One Top Wear Pad One Bottom Wear Pad Two Side Wear Pads Overall Length of Top and Bottom Pads: 9-1/4" Overall Width of Top and Bottom Pads: 3-1/2" Overall Height of Side Pads: 4" Fits around 3" x 5" Inner Slide Fits Demco...Add to Cart$73.95 -
Demco
B142G5ZC --- 1/4" x 2" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 1/4" Bolt Length: 2" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 20 TPI Used to hold Master Cylinder on Demco Brake ActuatorsAdd to Cart$0.48 -
B5160625G5ZC --- 5/16" x 5/8" Hex Head Bolt
Zinc Hex Head Bolt Bolt Diameter: 5/16" Bolt Length: 5/8" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 18 TPI Used on Demco and DexMarine (Dico/Titan) Brake Actuators DA91, DA91BZ, DA10 and DA20: Two required per...Add to Cart$0.15 -
Add to Cart$1.95 -
Demco
DA10 - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model 10 Brake Actuator. picture_as_pdf Download DA10 Breakdown picture_as_pdf Download DA10 InstructionsProduct Details$0.00 -
Demco
HN14G5ZC --- Hex Nut - 1/4"
Hex Nut - 1/4" 1/4" - 20 Hex Nut Quantity Required Per Actuator: 4 Used on Democ Master Clyinders: 5672 & 05680XAdd to Cart$0.20 -
LW14Z --- Split Lock Washer, 1/4"
Lock Washer Lock Washer - 1/4 Finish: Zinc PlatedAdd to Cart$0.12 -
Dexter Marine
RLBS --- Reverse Lockout Brake Solenoid
The reverse Lockout brake solenoid is connected to the tow vehicles back up lights. When the back up lights are activated the solenoid inhibits fluid flow to the brakes. Attaches directly into the back of the master cylinder. Brass adaptor fitting not...Add to Cart$53.95 -
Demco
SB12099 --- Master Cylinder Connector - 1/32" orfice
Inverted Flare Fitting - Screws into the back of a master cylinder to allow a 3/16" brake line to connect to the master cylinder 1/8" Pipe - 3/16" Inverted Flare Fitting Includes 1/32" Orifice Use with Drum Brakes OnlyAdd to Cart$3.95
