-
Dexter Marine
16087 --- Inner Slide w/ Channel - DX12.5 (Model 10)
Inner Slide with Channel DX12.5 (Model 10) Inner Slide with 4 hole Channel for DX12.5 (Model 10) Centered Channel Tube Width: 3-3/8" Tube Height: 4.5" Overall Length: 13.25" Finish: Painted Legacy Brand: Dico/Titan Model 10$244.95 -
Dexter Marine
16089 --- Brake Actuator with Channel - 12,500 lb Capacity - Model 10
Hydraulic Brake Actuator for Drum Brakes with Channel Hydraulic Brake Actuator for Drum Brakes with Channel Model 10 4 Hole Set Channel Maximum Capacity: 12,500 lb Maximum Vertical Load: 1,250 lb Mounting: Weld On to 3" Trailer Tongue Finish: Grey...$596.95 -
16287 --- CROFT Auto Transport Fender - Grey
This steel reinforced poly fender is durable yet flexible. Fits Croft Auto Transports Color: grey Fits Both sides Width: 9" Length: 31" Height: 13" Mounting hardware not included$77.95 -
Hydro-Act
16500 --- Hydro-Act Actuator Metal Filler Cap
Diameter of threads: 1-5/8" TPI of threads: 18$22.95 -
Dexter Marine
16568 --- Model 10 Outer Case w/Mounting Channel, 2-1/2" Offset
Model 10 Brake Actuator Outer Case with Mounting Channel, 2-1/2" Offset Finish: Painted Legacy Brand: Dico/Titan$222.95 -
Dexter
165962 --- Spindle Nut 1-1/2"-12tpi
Spindle Nut for 9k & 10k Dexter General Duty Axles - 99 Spindle.Distance Across Flats: 2-7/32"Thread Size: 1-1/2" - 12tpiThickness: 5/16"$10.95 -
165981 --- Knurled Drive-In Stud - 1/2"
Drive-In Stud Thread Diameter (A): 1/2" Stud Length (B): 1-5/8" Spline Length {C}: .28" Base Length (D): .60" Spline Diameter (E): .62"$8.95 -
Dexter
165994 --- Knurled Drive-In Stud - 1/2"
Drive-In Stud Thread Diameter (A): 1/2" Stud Length (B): 1-15/16" Spline Length (C): .27" Base Length (D): .52" Spline Diameter (E): .54"$3.45 -
Dexter Marine
16784 --- Inner Slide w/2-5/16" Drop Coupler - DX125 (Model 10)
Inner Slide with 2-5/16" Drop Coupler - DX12.5 (Model 10) Inner Slide with 2-5/16" Drop Coupler for DX12.5 (Model 10) Tube Width: 3-3/8" Tube Height: 4.5" Overall Length: 21" Drop: 4.5" Finish: Painted Legacy Brand: Dico/Titan Model 10$383.95 -
Dexter Marine
16855 --- Model 10 Outer Case w/ Mounting Channel, 1" Offset
Model 10 Brake Actuator Outer Case with Mounting Channel, 1" Offset Finish: Painted Legacy Brand: Dico/Titan$230.95 -
17100ATB --- Round Fender Aluminum Treadplate
Replacement round trailer fender constructed of Aluminum Treadplate. Available for Pickup only at one of our local Kansas City Service Centers Single Axle Round Trailer Fender Material: Aluminum Treadplate Width: 10" Length: 32" (Measured Bottom Center...$138.95 -
Dexter
17185 --- Wheel Cylinder Right Hand for Duo-Servo 12" Hydraulic Brakes
Please call for more details$44.95 -
Dexter
17186 --- Wheel Cylinder Left Hand for Duo-Servo 12" Hydraulic Brakes
Please call for more details$44.95 -
$93.95
-
Dexter Marine
17350 --- Inner Slide w/2-5/16" Drop Coupler - DX20EX (Model 20)
Inner Slide with 2-5/16" Drop Coupler - DX20EX (Model 20) Inner Slide with 2-5/16" Drop Coupler DX20EX (Model 20) Tube Width: 3-9/16" Tube Height: 4-9/16" Drop: 4.5" Overall Length: 24.25" Finish: Plated Legacy Brand: Dico/Titan Model 20$343.95 -
Demco
17434 --- Demco Master Cylinder Gasket
Demco Master Cylinder Gasket Fits Demco Brake Actuators: DA66, DA70, DA86, DA91, DA10, and DA20 Works with both Disc and Drum master cylinders: 5672 & 05680X$8.45 -
$3.95
-
Dexter Marine
17556 --- Model 6 Master Cylinder Cap
Model 6 Brake Actuator Master Cylinder Cap Cap includes diaphragm and gasket Inner Diameter: 2.75" Outer Diameter: 3-1/8" Height: 1.5" Black plastic cap Legacy Brand: Dico/Titan$18.95 -
Hydro-Act
1760 --- Hydro-Act Copper Washer for Master Cylinder - 1/2" ID
Inner Diameter: 1/2" Outer Diameter: 13/16" Fits Hydro-Act Master Cylinder Included with Master Cylinder kits, 10614$5.45 -
Dexter Marine
17762 --- Model 6 Cylinder Mounting Plate
Model 6 Brake Actuator Mounting Plate Finish: Zinc Plated Legacy Brand: Dico/Titan$12.45 -
Dexter Marine
17763 --- Model 6 Front Roller
Model 6 Brake Actuator Front Roller Inner Diameter: 5/8" Outer Diameter: 1-1/8" Length: 2-7/8" Finish: Zinc Plated Legacy Brand: Dico/Titan$10.95 -
Dexter Marine
17766 --- Model 6 Front Roller Pin
Model 6 Brake Actuator Front Roller Pin Finish: Zinc Plated Legacy Brand: Dico/Titan$12.95 -
Dexter Marine
17767 --- Model 6 Front Roller Cover #6000
Model 6 Brake Actuator Roller Cover for 6,000 lb Unit Finish: Zinc Plated Legacy Brand: Dico/Titan$12.95 -
Dexter Marine
17772 --- Model 6 Damper Pin
Model 6 Brake Actuator Damper Pin Finish: Zinc Plated Legacy Brand: Dico/Titan$7.45 -
Dexter Marine
17773 --- Model 6 Master Pin
Model 6 Brake Actuator Master Pin Finish: Zinc Plated Legacy Brand: Dico/Titan$13.95 -
Dexter Marine
17778 --- Model 20 Brake Actuator with Channel & 3" Adjustable Tow Ring - 20,000 lb Capacity
Hydraulic Brake Actuator for Drum Brakes with Adjustable and 3" Tow Ring Drum Brake Actuator with Adjustable Tow Ring Model 20 3" Tow Ring Maximum Capacity: 20,000 lb Maximum Vertical Load: 2,000 lb Mounting: Weld On to 3" Trailer Tongue Finish: Grey...$835.95 -
Dexter Marine
17803 --- Model 6 Breakaway Spring
Model 6 Brake Actuator Breakaway Spring Finish: Zinc Plated Legacy Brand: Dico/Titan$5.45 -
Dexter Marine
17815 --- Bolt 5/16"-18 UNC x 1/2" Self Tapping
Dexter DX8.0 (Dico Model 6) Quantity Required per Actuator: 4Demco Model DA66 and DA70 Quantity Required per Actuator: 2 5/16" x 1/2" Self-Tapping Bolt with Washer HD$1.95 -
18000ATB --- Jeep Type Flat Top Aluminum Treadplate Fender
Replacement Jeep style flat top trailer fender constructed of Aluminum Treadplate. Single Axle Trailer Fender - Jeep Type Flat Top Height: 8" Width: 8" Length: 24" (Measured Bottom Center to Bottom Center) Material: Aluminum Treadplate Radius: 1/2" Both...$65.95 -
18002ATB --- Jeep Type Flat Top Aluminum Treadplate Fender
Replacement Jeep style flat top trailer fender constructed of Aluminum Treadplate. Available for Pickup only at one of our local Kansas City Service Centers Tandem Axle Trailer Fender - Jeep Type Flat Top Height: 19" Width: 10" Length: 33" (Measured...$150.95 -
$20.95
-
Dexter Marine
18066 --- Model 6 Cover for Master Clyinder
Model 6 Brake Actuator Cover Finish: Zinc Plated Legacy Brand: Dico/Titan$18.95 -
Hydro-Act
1808-1 --- Hydro-Act Actuator Link - 5k, 6k, 7k
Quantity Required per Actuator: 4 For use on Hydro-Act 5k, 6k and 7k actuators Total Length of Link: 6.5" Width of Link: 1.25" Thickness of Link: 3/8" Two 1/2" holes$17.95 -
Dexter Marine
18090 --- Model 6 & 60 Actuator Coupler Locking Plate
Model 6 & Model 60 Brake Actuator Coupler Locking Plate Finish: Zinc Plated Legacy Brand: Dico/Titan$4.45 -
Dexter Marine
18092 --- Model 6 & 60 Actuator Coupler Spring
Model 6 & Model 60 Brake Actuator Coupler Spring Finish: Zinc Plated Legacy Brand: Dico/Titan$2.95 -
Hydro-Act
1828 --- Hydro-Act Actuator Push Rod Spring
Push Rod Spring for Hydro-Act Actuators Overall Length: 4" Outer Diameter: 1.5"$15.95 -
Hydro-Act
1829 --- Hydro-Act Actuator Shaft
Quantity Required per Actuator: 4 Over All Length: 5-3/8" For use on 5k-7k models Do not use on 12.5k models Requires two Lock nuts per shaft, part number: LN12G8ZF$29.95 -
Dexter Marine
18316W --- Model 6 Nylon 5/8" Washer
Model 6 Brake Actuator 5/8" Nylon Washer Finish: Zinc Plated Legacy Brand: Dico/Titan$2.95 -
Hydro-Act
1834 --- Connector bolt for Hydro-Act Master Cylinder
Fits Hydro-Act Master Cylinder Included with Master Cylinder kits, 10614$15.95 -
Hydro-Act
1844-2 --- Hydro-Act Actuator Damper Shock
Quantity Required per Actuator: 1 Collapsed Length: 6.25" Center of Pin to Center of Pin Extended Length: 8.125" Center of Pin to Center of Pin 7/16" pinhole diameter on both sides of damper$179.95 -
Dexter Marine
18487 --- Repair Kit for 2-5/16" Coupler
Model 6, Model 10& Model 20 Repair kit for 2-5/16" Coupler Legacy Brand: Dico/Titan$63.95 -
Dexter Marine
18497 --- Front Shoe for 12" x 2" Free Backing Hydraulic Brake, 6,000 lb Capacity - Bonded
Replacement Free-Backing shoe for 12" Free-Backing hydraulic brakesReplacement Front shoe for Demco and Dico Free-Backing brake assembliesStyle: BondedRear shoe not included: 18503Does not include the hold down partsShoe Hold Down pin #1, Part Number:...$46.95 -
On Sale!
Dexter Marine
18502-95 --- Titan 12" Free Backing Shoe Lever
This Shoe Lever fits Demco and Dico/Titan 12" Hydraulic Free Backing Brakes.MSRP: $24.95Was: $24.95Now: $15.25 -
Dexter Marine
18503 --- Rear Shoe for 12" x 2" Hydraulic Brake, 6,000 lb Capacity - Bonded
Replacement rear shoe for 12" uniservo hydraulic brakesReplacement Rear shoe for Demco and Dico brake shoesStyle: BondedFront shoe not included: 23492Front shoe for Free-Backing brakes: 18497Does not include the hold down partsShoe Hold pin #4, Part...$47.95 -
Dexter
18505 --- Shoe Hold Down Pin (#4)
This Shoe Hold-Down Pin is used on Hydraulic BrakesUse with Right Hand or Left Hand BrakeFits Hydraulic Brakes onlyOverall Length: 2-1/4"One required per brake shoeTwo required per brake assemblyRequires a Shoe Hold Down Spring to complete installation$1.95 -
Dexter Marine
18619 --- Model 6 Nylon 7/8" Washer
Model 6 Brake Actuator 7/8" Nylon Washer Finish: Nylon Legacy Brand: Dico/Titan$2.95 -
Dexter Marine
18909 --- Model 10 Brake Actuator with Channel & Adjustable 2-5/16" Coupler - 12,500 lb Capacity
Hydraulic Brake Actuator for Drum Brakes with Channel Drum Brake Actuator with Channel Model 10 4 Hole Set Channel Maximum Capacity: 12,500 lb Maximum Vertical Load: 1,250 lb Mounting: Weld On to 3" Trailer Tongue Finish: Grey Primed Included Adjustable...$780.95 -
Dexter Marine
18911 --- Brake Actuator with Channel & Adjustable 3" Tow Ring - 12,500 lb Capacity - Model 10
Hydraulic Brake Actuator for Drum Brakes with 3" Tow Ring Drum Brake Actuator with Channel Model 10 4 Hole Set Channel Maximum Capacity: 12,500 lb Maximum Vertical Load: 1,250 lb Mounting: Weld On to 3" Trailer Tongue Finish: Grey Primed Included...$637.95 -
Demco
1906 --- Wheel Cylinder Left Hand Assembly for 10" and 12" Hydraulic Brake
Left Hand Uniservo Wheel Cylinder Fits Uni-Servo and Free-backing Hydraulic Brakes 1-1/8" Bore Includes Push Rod and Bleeder Finish: Aluminum Mounting Bolts and Washers not included, Requires two of each: B5160625G5ZC and 12489$35.95 -
Demco
1907 --- Wheel Cylinder Right Hand Assembly for 10" and 12" Hydraulic Brake
Right Hand Uniservo Wheel Cylinder Fits Uni-Servo and Free-backing Hydraulic Brakes 1-1/8" Bore Includes Push Rod and Bleeder Finish: Aluminum Mounting Bolts and Washers not included, Requires two of each: B5160625G5ZC and 12489$35.95 -
Demco
190910M --- 10" Hydraulic Uni-Servo Brake kit - Pair - 3.5K
10” Demco Hydraulic Brake Assembly Kit Kits Includes Left Brake (3201909), Right Brake (3201910) and all mounting hardware for the pair Use with 10" Hubs and Drums Fits Standard 4 Bolt Mounting Flange- 2.75" x 2.75" 3,500 lb Capacity per...$163.95 -
Bearing Buddy
1938 --- Bearing Buddy
The Bearing Buddy helps prevent wheel bearing failure on utility, boat, horse and many other types of trailers. The ultimate in trailer wheel bearing protection. The spring loaded piston maintains slight, controlled pressure inside grease filled hubs...$24.95 -
Bearing Buddy
1980 --- Bearing Buddy
The Bearing Buddy helps prevent wheel bearing failure on utility, boat, horse and many other types of trailers. The ultimate in trailer wheel bearing protection. The spring loaded piston maintains slight, controlled pressure inside grease filled hubs...$24.95 -
Bearing Buddy
1980SS --- Bearing Buddy - Stainless Steel
The Bearing Buddy helps prevent wheel bearing failure on utility, boat, horse and many other types of trailers. The ultimate in trailer wheel bearing protection. The spring loaded piston maintains slight, controlled pressure inside grease filled hubs...$34.95 -
Kodiak
2/HRCM-10-KIT --- 10" Kodiak Disc Brake Kit for 3,500 lb axles - 5 on 4-1/2" - Pair
The rotor and hub are cast and machined as a single unit. This minimizes rotor runout and improves the units balance which leads to a smoother ride. Kodiak disc brakes are easy to install when retro-fitting and/or upgrading from drum brakes. Kodiak disc...$564.95 -
Kodiak
2/HRCM-12-KIT --- 12" Kodiak Disc Brake Kit for 6,000 lb axles - 6 on 5-1/2" - Pair
The rotor and hub are cast and machined as a single unit. This minimizes rotor runout and improves the units balance which leads to a smoother ride. Kodiak disc brakes are easy to install when retro-fitting and/or upgrading from drum brakes. Kodiak disc...$672.95 -
Kodiak
2/HRCM-13-KIT --- 13" Kodiak Disc Brake Kit for 7,000 lb axles - 8 on 6-1/2" - Pair
The rotor and hub are cast and machined as a single unit. This minimizes rotor runout and improves the units balance which leads to a smoother ride. Kodiak disc brakes are easy to install when retro-fitting and/or upgrading from drum brakes. Kodiak disc...$1,089.95 -
On Sale!
Dexter
200 --- Shoe and Lining Kit for 3,500 lb Capacity Hayes Electric Brake
Kit for One Brake Use with Right Hand or Left Hand Brake Kit Includes Hold Down Springs and Pins Fits 10" Hayes Brake Shoe and Lining KitMSRP: $90.95Was: $90.95Now: $45.00 -
Tekonsha
20000 --- Battery Case for 12V Rechargeable Sealed Battery - Lockable
Protect your battery with this rust proof heavy duty polymer case. Quick, easy two-bolt or weldable installation on any flat surface. Galvanized metal mounting bracket and Locking bar provide secure battery protection.Installs: Two-Bolt or Weldable on...$30.95 -
Hopkins
20009 --- TAP© Replacement Break-Away Pin and Cable (Old Style)
Replacement Pin Overall Length of Nylon Pin: 2-1/4" Pin Dimension: 1/2" tall x 3/8" wide Old Switch dimensions: 4-1/4" Length including bracket, 1-5/8" width. Fits Old Style switch: 20005$7.45 -
Hopkins
20010 --- TAP® Replacement Break-Away Switch
Protect your trailer investment with this replacement break-away switch and pin! Equipped with a patented weatherproof design to protect this key trailer safety item from the elements. In a trailer break-away event, the pin is pulled from the switch thus...$9.95 -
Hopkins
20011 --- 12v Charger for Breakaway Batteries
For use with 12 volt 5amp Breakaway Batteries Stores inside battery box Charges Battery when Vehicle and Trailer are connected Easy Three Wire connection Red Wire: Connects to positive terminal of battery you are charging Blue Wire: Connects...$6.95 -
Hopkins
20050 --- TAP® Engager™ Break-Away Switch w/ LED
The Engager™ LED break-away switch contains an integrated LED which confirms the switch is functioning properly and sufficient braking power is being sent to the trailer brakes. Replacement pin and Clip, Part No. 20051 Hoppy / Tap Model...$18.95 -
Hopkins
20051 --- TAP® Replacement Engager™ Break-Away Pin & Cable
Replacement Pin Overall Pin Length: 1-5/8" Pin Dimension: 7/16" tall x 3/16" wide Replacement Pin & Cable for 20010 & 20050 Break-Away Switch Hoppy / Tap Model #20051$6.95 -
Tekonsha
2009 --- Tekonsha Breakaway Switch
Metal Breakaway Switch Durable Metal Parts Corrosion Free Silver Contact Points Trouble Free Brass Pull Pin$39.95 -
Hopkins
20099 --- TAP© Engager Break-Away Kit with LED Test Light - Side Mount
The Engager is designed to activate the trailer brakes in the event the trailer is separated from the towing vehicle. Trailer break-away kits are legally required in most states and Canada. The Engager is designed to be used with one or two axle trailers...$53.95 -
Hopkins
20099WP --- TAP© Engager Break-Away Mounting Plate - Side Mount
This weldable mounting plate eliminates the need to drill holes in the trailer frame when installing the TAP© Engager Break-Away Side Mount Model. Weldable Mounting Plate Use with TAP© Engager Break-Away Side Mount, Part No. 20099$11.95 -
Tekonsha
2009A --- Replacement Cable and Pin for 2009 Tekonsha Breakaway Switch
Use on Tekonsha 2009 Breakaway SwitchUse on Tekonsha 2009 Breakaway Switch$17.95 -
Tekonsha
2010 --- Tekonsha Breakaway Switch
Breakaway Switch Nylon Pull Pin will not Freeze Up Corrosion Free Silver Contact Points Weldable Metal Tab Reinforced Nylon Case$20.95 -
Tekonsha
2010A --- Replacement Cable and Pin for 2010 Tekonsha Breakaway Switch
Use on Tekonsha 2010 Breakaway SwitchUse on Tekonsha 2010 Breakaway Switch$9.45 -
Tekonsha
2018 --- Battery Case for 12V Rechargeable Sealed Battery
Protect your battery with this rust proof heavy duty polymer case. This durable battery case is quick and easy to install on jackpost or A-frame of trailer. It is designed with a U-shaped clamp fastener that mounts over most trailer tongues. Installs:...$27.95 -
Dexter
201B --- Shoe and Lining Kit for 6,000 lb Capacity Hayes Electric Brake
Use with Right Hand or Left Hand Brake Fits 12" Hayes Brake - Riveted Shoe and Lining Kit Kit for One Brake Shoe Hold Down Kit Sold Separately, Part No. 305$114.95 -
Dexter
202 --- Shoe and Lining Kit for 3,500 lb Capacity Dexter Electric Brake
Use with Right Hand or Left Hand Brake Fits 10" Dexter Brake Shoe and Lining Kit Kit for One Brake Kit Includes Hold Down Springs and Pins$58.95 -
2023 --- 12 Volt Rechargeable Sealed Battery
Use this sealed battery on single, tandem and tri-axle trailers equipped with electric brakes. Note: Battery requires periodic recharging to maintain optimum performance 12V Sealed Lead Acid Battery 5-Amp/hour$26.95 -
Tekonsha
2024 --- 12V Tekonsha Battery Charger
12 Volt "Trickle Charger" is used to charge trailer battery from electrical system of towing vehicle. It is designed with an automatic shut off feature that will not permit the battery to overcharge. Patented temperature compensated design provides...$41.95 -
Hopkins
20400 --- TAP© Engager Break-Away Kit with LED Test Light - Front Mount
The Engager is designed to activate the trailer brakes in the event the trailer is separated from the towing vehicle. Trailer break-away kits are legally required in most states and Canada. The Engager is designed to be used with one or two axle trailers...$58.95 -
Hopkins
20400WP --- TAP© Engager Break-Away Mounting Plate - Front Mount
This weldable mounting plate eliminates the need to drill holes in the trailer frame when installing the TAP© Engager Break-Away Front Mount Model. Weldable Mounting Plate Use with TAP© Engager Break-Away Front Mount, Part No. 20400$16.95 -
Tekonsha
2051 --- Battery Case for 12V Rechargeable Sealed Battery - Bolt On Lockable
Protect your battery with this rust proof heavy duty polymer case. Quick, easy four-bolt installation on any flat surface. Lockable Battery Case Use with sealed battery part number: 2023 Installs: Four-Bolt on Flat Surface Protects Battery...$17.95 -
Dexter
21-301 --- Fortress Aluminum Oil Caps - Screw In - 4.000"
Dexter's Fortress Oil Cap provides revolutionary protection for your trailer axle. Engineered with precision, Fortress includes a durable Dexter genuine bolt-on and threaded bearing protection solution. Its reinforced retainer ring design offers a...$36.95 -
Dexter
21-302 --- Fortress Aluminum Oil Caps - Screw In - 3.500"
Dexter's Fortress Oil Cap provides revolutionary protection for your trailer axle. Engineered with precision, Fortress includes a durable Dexter genuine bolt-on and threaded bearing protection solution. Its reinforced retainer ring design offers a...$36.95 -
Dexter
21-303 --- Fortress Aluminum Oil Caps - Screw In - 2.875"
Dexter's Fortress Oil Cap provides revolutionary protection for your trailer axle. Engineered with precision, Fortress includes a durable Dexter genuine bolt-on and threaded bearing protection solution. Its reinforced retainer ring design offers a...$36.95 -
Dexter
21-304 --- Fortress Aluminum Oil Caps - Screw In - 3.750"
Dexter's Fortress Oil Cap provides revolutionary protection for your trailer axle. Engineered with precision, Fortress includes a durable Dexter genuine bolt-on and threaded bearing protection solution. Its reinforced retainer ring design offers a...$36.95 -
Dexter
21-305 --- Fortress Aluminum Oil Caps - Screw In - 4.000"
Dexter's Fortress Oil Cap provides revolutionary protection for your trailer axle. Engineered with precision, Fortress includes a durable Dexter genuine bolt-on and threaded bearing protection solution. Its reinforced retainer ring design offers a...$36.95 -
21-41-1 --- Dust Cap - 1.986" Outer Diameter
Dust Cap with hole for greasing spindle. Dust Cap Plug Sold Separately, Part No. 85-1 Use with BT4-43, BT5-43 Hubs, BT4-49, BT5-49, 58-49R, 513-49R, 545UHI thru 655UHI, and Current 494H Hubs Dust Cap (O.D.): 1.986" Center hole: 1.18" ...$2.95 -
21-42-1 --- Dust Cap - 2.448" Outer Diameter
Dust Cap for use with greasable spindles Dust Cap Plug Sold Separately, Part No. 85-1 Style: Press In Dust Cap (O.D.): 2.448" Center hole: 1.18" (1-3/16")$3.45 -
21-43-1 --- Dust Cap - 2.718" Outer Diameter
Dust Cap for use with greasable Spindles Dust Cap Plug Sold Separately, Part No. 85-1 Use with 42865, and 42865A Hubs Style: Press In Dust Cap (O.D.): 2.718" Center hole: 1.18" (1-3/16")$5.45 -
$5.45
-
$5.95
-
2104 --- Round Fender
Replacement round trailer fender constructed of 16 Gauge Steel, plain finish. Fits Wheel Sizes: 13" and 14" Radius: 1" on Both Sides Length: 27.5" (Measured Bottom Center to Bottom Center) Height: 10-1/4" Width: 9" Single Axle Round Trailer...$66.95 -
2105 --- Round Fender
Replacement round trailer fender constructed of 16 Gauge Steel, plain finish. Single Axle Round Trailer Fender Height: 15-1/4" Length: 32" (Measured Bottom Center to Bottom Center) Width: 9" Radius: 1" and 90 Degree Back Fits Wheel Sizes: 14" and...$45.95 -
2105G --- Round Fender Galvanized
Replacement round trailer fender constructed of 16 Gauge Steel, galvanized finish. Single Axle Round Trailer Fender Height: 16" Length: 32" (Measured Bottom Center to Bottom Center) Width: 9" Radius: 1"Both Sides Finish: Galvanized Fits Wheel Sizes: 14"...$81.95 -
2106 --- Round Fender
Replacement round trailer fender constructed of 16 Gauge Steel, plain finish. Single Axle Round Trailer Fender Height: 20-1/4" Width: 10-3/4" Length: 36" (Measured Bottom Center to Bottom Center) Fits Wheel Sizes: 15" and 16" Finish: Plain...$109.95 -
2107 --- Round Fender
Replacement round trailer fender constructed of 16 Gauge Steel, plain finish. Single Axle Round Trailer Fender Height: 15-1/4" Length: 32" (Measured Bottom Center to Bottom Center) Width: 10-3/4" Radius: 1" and 90 degrees Back Style: Plain...$63.95 -
Dexter
2135 --- Dexter Oil Cap
Torque to 20-30 LB-FT Diameter of Threads on Cap: 2.875" Use with 4632 Oil Cap Plug Use with 1045 O-Ring Dexter Oil Cap, Fits 6k - 8k Hubs$10.95 -
Dexter
2136 --- Dexter Oil Cap
Will not fit 9K, 10K & 13G one-piece Dexter oil hub drums, July 2009 & newer. Dexter Oil Cap, Fits older 9K - 15K Hubs Diameter of Threads on Cap: 4 Inches O-Ring Sold Separately, Part No. 1050 Oil Cap Plug Sold Separately, Part No...$15.95 -
Dexter
2188 --- Dexter Oil Cap
This new style oil cap only fits Dexter 9K, 10K & 13G general duty one-piece oil hub drums, July 2009 & newer. Diameter of Threads on Cap: 3.5 Inches Dexter Oil Cap, Fits 9K, 10K & 13G Dexter Oil Hub Drums, July 2009 & Newer O-Ring...$14.45