-
Dexter Marine
7745 --- Connector Gasket DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Connect Gasket Inner Diameter: 1/2" Outer Diameter: 13/16" Use with 12099 fitting Fits older Dico/Titan master cylinders with the rear 1/2" fitting Finish: Brass DexMarine Part Number:...$4.45 -
Dexter Marine
7768 ---Breakaway Chain DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Breakaway Chain Total Length of chain: 47" Link Length: 1-5/8" Link Width: 3/4" Link Diameter: 3/16" Finish: Zinc Plated DexMarine Part Number: 068-468-00 Legacy Brand: Dico/Titan$23.95 -
Dexter Marine
7784 --- Damper Shock - DX20EX
Model 20 Brake Actuator Damper Shock Length Collapsed: 8" Center of pinhole to center of pinhole Length Extended: 12" Center of pinhole to center of pinhole Diameter of body: 1-3/4" Diameter of smaller pinhole: 1/2" Diameter of larger pinhole:...$60.95 -
Dexter Marine
8-436-05 --- UFP by Dexter Idler Hub for 3.7k - Zinc
UFP by Dexter, Idler Hub for 3.7K. Fits 3.7k UFP spindles Includes races and studs Hub includes a groove for an O-ring for Oil Cap installation Bolt Pattern: 5 on 4.5 Finish: Zinc Studs: 1/2 - 20 Requires Inner Bearing: L68149 Requires Outer...$77.95 -
Dexter Marine
8-447-05 --- UFP by Dexter Idler Hub for 4.2k - Zinc
UFP by Dexter, Idler Hub for 4.2K. Fits 4.2k UFP spindles Includes races and studs Hub includes a groove for an O-ring for Oil Cap installation Bolt Pattern: 5 on 4.5 Finish: Zinc Studs: 1/2 - 20 Requires Inner Bearing: L68149 Requires Outer...$112.95 -
Dexter Marine
8284 --- Centering Rail - DX20EX
DX20EX (Model 20) Brake Actuator Centering Rail Finish: Zinc Plated DexMarine Part Number: 068-469-00 Legacy Brand: Dico/Titan$14.95 -
Dexter Marine
8288 --- Front Roller Bolt DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Front Roller Bolt Bolt: 5/8" x 4-3/8" x 1/2" - 13 Quantity Required for Dico Model 10 Actuator: 1 Quantity Required for Dico Model 20 Actuator: 2 Finish: Zinc Plated DexMarine Part Number:...$19.95 -
Dexter Marine
8289 --- Front Roller Cover DX20EX
DX20EX (Model 20) Brake Actuator Roller Cover Finish: Zinc Plated DexMarine Part Number: 068-472-00 Legacy Brand: Dico/Titan$18.95 -
Dexter Marine
8291 --- Rear Roller DX8.0, DX12.5 & DX20EX
DexMarine DX8.0, DX12.5 & DX20EX Brake Actuator Rear Roller Quantity Required for DX8.0 & DX12.5 Actuators: 2 Quantity Required for DX20EX Actuator: 6 Finish: Zinc Plated DexMarine Part Number: 068-007-00 Legacy Brand: ...$7.45 -
Dexter Marine
8294 --- Rear Roller Bolt DX20EX
DX20EX (Model 20) Brake Actuator Rear Roller Bolt Finish: Zinc Plated Bolt: 5/8" - 18 x 5" Quantity Required for Dico Model 20 Actuator: 2 DexMarine Part Number: 007-369-00 Legacy Brand: Dico/Titan$19.95 -
Dexter Marine
8295 --- Rear Roller Bolt DX20EX
DX20EX (Model 20) Brake Actuator Roller Bolt Finish: Zinc Plated DexMarine Part Number: 007-370-00 Legacy Brand: Dico/Titan$12.95 -
Dexter Marine
8297 --- Spacer DX20EX
DX20EX (Model 20) Brake Actuator Spacer Quantity Required per Actuator: 3 Finish: Zinc Plated DexMarine Part Number: 068-008-00 Legacy Brand: Dico/Titan$13.45 -
Dexter Marine
8298 --- Damper Bar DX20EX
DX20EX (Model 20) Brake Actuator Damper Bar Quantity Required for Dico Model 20 Actuator: 2 Finish: Zinc Plated DexMarine Part Number: 068-009-00 Legacy Brand: Dico/Titan$6.45 -
Dexter Marine
8301 --- Push Rod Block DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Push Rod Block Finish: Zinc Plated DexMarine Part Number: 068-010-00 Legacy Brand: Dico/Titan$7.45 -
Dexter Marine
8388 --- Cylinder Bracket Assembly - Right - DX12.5X & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Right Hand Master Cylinder Bracket Assembly Finish: Painted DexMarine Part Number: 068-011-00 Legacy Brand: Dico/Titan$38.95 -
Dexter Marine
8389 --- Cylinder Bracket Assembly - Left - DX12.5 & DX20EX
DX12.5 (Model 10) & DX20EX (Model 20) Brake Actuator Left Hand Master Cylinder Bracket Assembly Finish: Painted DexMarine Part Number: 068-012-00 Legacy Brand: Dico/Titan$38.95 -
Hydro-Act
850279 --- Hydro-Act Actuator Metal Vented Filler Cap
Diameter of threads: 1-5/8" TPI of threads: 18 Vent filler Cap NSN Number: 2590 01 388 2416 Tacom Part Number: 12331725-2 Hydro-Act Part Number: 850198 Hydro-Act Model Number: 850279$65.95 -
Dexter Marine
99-060-00 --- UFP by Dexter Model A-60 Inner Member - Drum
Inner Member fits UFP by Dexter Model A-60 brake actuators - For use with Drum Brakes Inner member includes all internal parts Currently no downloads are available please call with questions.$297.95 -
Dexter Marine
99-060-20 --- UFP by Dexter Model A-60 Inner Member - Disc
Inner Member fits UFP by Dexter Model A-60 brake actuators - For use with Disc Brakes Inner member includes all internal parts and reverse Lockout with bypass hose Currently no downloads are available please call with questions.$462.95 -
Dexter Marine
99-075-00 --- UFP by Dexter Model A-75 Inner Member - Drum (Discontinued)
Inner Member fits UFP by Dexter Model A-75 brake actuators - For use with Drum Brakes Inner member includes all internal parts Currently no downloads are please call with questions. -
B14075G5ZC --- 1/4" x 3/4" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 1/4" Bolt Length: 3/4" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 20 TPI Used on Dico/Titan Model 60 Brake Actuators$1.45 -
Demco
B142G5ZC --- 1/4" x 2" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 1/4" Bolt Length: 2" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 20 TPI Used to hold Master Cylinder on Demco Brake Actuators$0.48 -
B383G5ZC --- 3/8" x 3" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 3/8" Bolt Length: 3" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 16 TPI Used on Dico/Titan Model 10 & Model 20 Brake Actuators$1.45 -
B384G5ZC --- 3/8" x 4" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 3/8" Bolt Length: 4" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 16 TPI Used on Demco Brake Actuators Models DA66, DA70 & DA86$1.45 -
Hydro-Act
B384G5ZF --- 3/8" x 4" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 3/8" Bolt Length: 4" (under head to end of threads) Grade 5 Zinc plated Fine Thread, 24 TPI For use on Hydro-Act Brake Actuators$0.67 -
B385G5ZC --- 3/8" x 5" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 3/8" Bolt Length: 5" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 16 TPI Used on DexMarine DX8.0 (Dico/Titan Model 6) Brake Actuators Requires two bolts to attach the Cylinder mounting plate...$1.95 -
B51605G5ZC --- 5/16" x 1/2" Hex Head Bolt
Zinc Hex Head Bolt Bolt Diameter: 5/16" Bolt Length: 1/2" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 18 TPI Used on Dico/Titan Model 10 & Model 20 Brake Actuators$0.21 -
B5160625G5ZC --- 5/16" x 5/8" Hex Head Bolt
Zinc Hex Head Bolt Bolt Diameter: 5/16" Bolt Length: 5/8" (under head to end of threads) Grade 5 Zinc plated Coarse Thread, 18 TPI Used on Demco and DexMarine (Dico/Titan) Brake Actuators DA91, DA91BZ, DA10 and DA20: Two required per...$0.15 -
Hydro-Act
B7162G5ZF --- 7/16" x 2" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 7/16" Bolt Length: 2" (under head to end of threads) Grade 5 Zinc plated Fine Thread, 20 TPI Use on Hydro-Act Brake Actuators$1.45 -
Hydro-Act
B7164G5ZF --- 7/16" x 4" Hex Head Bolt, Grade 5
Zinc Hex Head Bolt Bolt Diameter: 7/16" Bolt Length: 4" (under head to end of threads) Grade 5 Zinc plated Fine Thread, 20 TPI Use on Hydro-Act Brake Actuators$0.88 -
$1.95
-
CP18 --- Cotter Pin 1/8" x 1-1/2"
Cotter Pin 1/8" x 1-1/2"$0.28 -
CP316 --- Cotter Pin 3/16" x 2"
Cotter Pin 3/16" x 2" Used on DexMarine DX8.0 and DX12.5 Brake Actuators One required on DX8.0 Two required on DX12.5$0.96 -
Demco
DA10 - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model 10 Brake Actuator.$0.00 -
Demco
DA20 - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model 20 Brake Actuator.$0.00 -
Demco
DA66 - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model DA66 Brake Actuator.$0.00 -
Demco
DA70 - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model DA70 Brake Actuator.$0.00 -
Demco
DA86 - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model DA86 Brake Actuator.$0.00 -
Demco
DA91 - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model DA91 Brake Actuator.$0.00 -
Demco
DA91BZ - Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Demco Model DA91BZ Brake Actuator.$0.00 -
Dexter Marine
DX12.5 - Titan Parts Breakdown by Dexter Marine
This Breakdown will help you pick out the replacements parts for the DexMarine 12.5 Brake Actuator (Dico/Titan Model 10).$0.00 -
Dexter Marine
DX20EX - Parts Breakdown by Dexter Marine
This Breakdown will help you pick out the replacements parts for the DexMarine DX20EX Brake Actuator (Legacy Dico/Titan Model 20).$0.00 -
Dexter Marine
DX8.0 - Titan Parts Breakdown by Dexter Marine
This Breakdown will help you pick out the replacements parts for the DexMarine DX8.0 Brake Actuator (Legacy Dico/Titan Model 6).$0.00 -
$7.45
-
FW12Z --- Flat Washer 1/2"
1/2" Flat Washer Finish: Zinc Plated Inside Diameter: 1/2" Used on Croft Tow Dollies and Demco DA66 & DA70 Brake Actuators$0.44 -
FW38Z --- Flat Washer 3/8"
Flat Washer 3/8" Finish: Plated Quantity Required Per Actuator: 2 Use on DexMarine DX8.0 Brake Actuator Use with bolt: B385G5ZC Use with lut: HN38G5ZC$0.30 -
HN12G5ZC --- 1/2" Hex Nut - DX12.5 & DX20EX
Hex Nut: 1/2" - 13 Quantity Required for Dico Model 10 Actuator: 1 Quantity Required for Dico Model 20 Actuator: 2$0.68 -
Demco
HN14G5ZC --- Hex Nut - 1/4"
Hex Nut - 1/4" 1/4" - 20 Hex Nut Quantity Required Per Actuator: 4 Used on Democ Master Clyinders: 5672 & 05680X$0.20 -
HN38G5ZC --- Hex Nut DexMarine DX8.0, DX12.5, DX20EX
Quantity Required Per Actuator: 2 3/8" - 16 Two nuts required on all three units DX8.0, DX12.5 & DX20EX Fits Titan/Dico Models 6, 10 & 20$0.24 -
$0.36
-
HSN58 --- Slotted Hex Nut - DX20EX
5/8" Slotted Hex Nut (Castle Nut) Quantity Required for DexMarine DX20EX Actuator: 3 Slotted Hex Nut 5/8" - 18 tpi Finish: Zinc Plated Legacy Brand Dico/Titan Model 20$1.95 -
Hydro-Act
Hydro-Act Actuators TA125 Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Hydro-Act Brake Actuators.$0.00 -
Hydro-Act
Hydro-Act Actuators TA6-TA7 Parts Breakdown
This Breakdown will help you pick out the replacements parts for the Hydro-Act Brake Actuators.$0.00 -
LN12G8ZF --- Lock Nut - 1/2"
Lock Nut 1/2" Lock Nut Threads Per Inch: 20$0.38 -
$0.13
-
LW12Z --- Lock Washer - 1/2"
Lock Washer Lock Washer - 1/2 Finish: Zinc Plated$0.34 -
LW14Z --- Split Lock Washer, 1/4"
Lock Washer Lock Washer - 1/4 Finish: Zinc Plated$0.12 -
LW516Z --- Lockwasher - 5/16"
Lock Washer Lock Washer - 5/16 Finish: Zinc Plated$0.18 -
Dexter Marine
Model 60 - 40960 Titan Parts Breakdown by Dexter Marine
This Breakdown will help you pick out the replacements parts for the Dico Model 60 Brake Actuator.$0.00 -
Demco
NLN12G2ZC --- 1/2" Nylon Lock Hex Nut
1/2" Nylon Lock Nut Coarse Thread Nylon Lock Nut Size: 1/2"-13 Grade 2 Use on Demco Brake Actuators DA66, DA70 & DA86$0.87 -
NLN716G8ZF --- 7/16" Zinc Nylon Lock Nut Fine Thread
7/16" Nylon Lock Nut Fine Thread Nylon Lock Nut Size: 7/16"-20 Grade 8$1.95 -
Dexter Marine
RLBS --- Reverse Lockout Brake Solenoid
The reverse Lockout brake solenoid is connected to the tow vehicles back up lights. When the back up lights are activated the solenoid inhibits fluid flow to the brakes. Attaches directly into the back of the master cylinder. Brass adaptor fitting not...$53.95 -
Demco
SB12099 --- Master Cylinder Connector - 1/32" orfice
Inverted Flare Fitting - Screws into the back of a master cylinder to allow a 3/16" brake line to connect to the master cylinder 1/8" Pipe - 3/16" Inverted Flare Fitting Includes 1/32" Orifice Use with Drum Brakes Only$3.95
Main Menu
- Home
- Parts expand_more
- Trailers expand_more
-
Store Locations expand_more
-
All Store Locations
-
Kansas City Service Center
Croft - Kansas City, MO
4933 Truman Road
Kansas City, MO 64127Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm816-483-7274
-
Lee's Summit Service Center
Croft - Lee's Summit, MO
2401 S. State Route 291
Lee's Summit, MO 64082Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm816-525-9355
-
Olathe Service Center
Croft - Olathe, KS
970 N. Rogers Road
Olathe, KS 66062Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm913-780-1818
-
Smithville Service Center
Croft - Smithville, MO
632 South U.S. 169 Highway
Smithville, MO 64089Hours:
Monday through Friday: 8:00am - 5:00pm
Saturday: 8:00am - 2:00pm816-532-8900
-
All Store Locations
- Events
-
Resources expand_more
Information
Sponsorships
-
All Resources
-
Information
Sponsorships
-
-
About Us
-
The Foundation of Croft Trailer Supply
Product Reliability. Customer Satisfaction. Speedy Delivery.
Croft has grown from generation to generation to include four service centers and a distribution center. We still manufacture Croft trailers with the same integrity and attention to craftsmanship as George did over seventy years ago. We also offer more than five thousand towing and trailer parts to meet every need our customers have.
-
-
Services
-
Services
We offer a variety of services including new installations on tow vehicles, trailer service and repair, DOT trailer inspections, and custom modifications to trailers. Our service technicians are here to keep you rolling.
-
-
Sponsorships
-
Sponsorships
-
-
Careers
-
Work at Croft
We're always looking for incredible people to join the Croft family. To apply, fill out an application online by clicking the link below.
-
-
All Resources
- Contact Us