Product Description
15" Wheel & Tire.
IMPORTANT - 5.0" is measured outside one hole to the center of the third hole as shown in alternate picture above.
- Silver Modular Wheel Design
- Rim Diameter: 15"
- Bolt Circle Pattern: 5 on 5.0" - See alternate picture for how to measure your rim
- Tire Size: ST205/75R15
- Center Hole Diameter: 3.30"
- Maximum Capacity per Assembly: 1,820 lb
- Load Range C (6 Ply)
- Zero Offset
California Residents: Proposition 65
Torque Specifications
Using a properly calibrated torque wrench, all the lug nuts installed with any new tire/wheel assembly must have their torque values checked after the first 10, 25, and 50 miles (and periodically checked during normal use thereafter). This process should be repeated any time that the lug nuts are removed from the wheel.
| Size | Bolt Circle | Off Set |
|
|||||
| 12" | 4-4 or 5-4.5 | 0.00 | 50-75 | 95-105 | ||||
| 13" | 4-4 or 5-4.5 | 0.00 | 50-75 | 95-105 | ||||
| 14" | 5-4.5 | 0.00 | 90-120 | 110-120 | ||||
| 15" | 5-4.5 | 0.00 | 90-120 | 110-120 | ||||
| 15" | 6-5.5 | 0.00 | 90-120 | 110-120 | ||||
| 16" (1/2" Stud) | 6-5.5 | 0.00 | 90-120 | 110-120 | ||||
| 16" (9/16" Stud) | 8-6.5 | 0.00 | 90-120 | 125-130 | ||||
| 17.5" (9/16" Stud) | 8-6.5 | 0.00 | N/A | 125-130 | ||||
| 17.5" (5/8" Stud) | 8-6.5 | 0.00 | 275-325 (Flange Nut) | 150 | ||||
*Always verify installation recommendations, procedures, and tolerances with all other running gear components(s)
Lug Nut Installation Sequence(s)
